One for All URC1211 Manual Del Usuario página 6

SETUP
SETUP BY CODE
If the brand of your device is not listed in the SimpleSet feature, you
can set up by trying codes individually. To do this firstly locate your
brand in the Code List. Codes are listed by brand and device, and in
order of popularity.
1.
Turn on your device (not on standby) and point the Essence
remote towards it.
2.
3.
4.
The LED will blink twice on the last digit of the code.
5.
6.
If the device turns off your remote is ready to use. If not, repeat
steps 2-5 with the next code in the list.
LEARNING
Your Essence remote control can learn any function from any other
working remote control. This is a quick and easy one-time setup that
allows to control any infrared controlled device you have in your living
room. It also allows you to add a key or keys that may be missing to a
spare key on the Essence.
To do this, firstly make sure you have all your original remote controls
to hand, and that they have working batteries in.
To learn functions, the original remote should be approximately 3cm
from the Essence remote, pointing towards it:
1.
2.
3.
Hold down the Setup key until the LED under the
Device key blinks twice.
Enter the first 4 digit code listed for your brand
(e.g. 1840 for LG).
Now aim the remote towards your device and press
the Power key.
2 - 5 CM
Hold down the Setup key until the LED under the
Device key blinks twice.
Press 975 – the LED should blink twice.
Press and release the key you want to learn a
function onto (for example the TV Power key) –
the LED will begin to flash rapidly.
6