THOMSON WS502 Manual De Instrucciones página 14

07. SUB OUT output port
06. Power port
Line In Input
1. Press the Mode/Volume button to select a Line In input. The light should turn pale green.
2. Use the appropriate RCA cable to connect an audio source to the speakers.
3. Play music from your connected device and adjust the volume on your device by turning
the Mode/Volume button.
Sub-woofer output (Sub Out)
1. Use the audio cable to connect an additional active sub-woofer (NOT included) to the
WS502.
2. Play music from your connected device and adjust the volume on your device by turning
the Mode/Volume button.
Auxiliary output (AUX Out)
1. Use the audio cable to connect the auxiliary input port of an additional device (NOT
included: soundbar, bookshelf speaker, etc.) to the WS502.
2. Play music from your connected device and adjust the volume on your device by turning
the Mode/Volume button.
Bluetooth operation
1. Switch on the speaker and go into Bluetooth mode by pressing the Mode/Volume button
on the upper panel of the active speaker. The light will turn blue.
2. Access the "Settings" section of your source device (mobile phone, tablet, etc.) and
search for nearby Bluetooth devices: You will find "WS502" in the list.
3. Pair your device with "WS502".
4. Play the audio tracks on your device and adjust the volume according to preference.
5. Double-tap quickly to disconnect Bluetooth.
09. Line in input port
08. USB input port
10
- EN 14 -
10. AUX OUT output port