Publicidad
Idiomas disponibles
Idiomas disponibles
USER MANUAL
3) Place the speaker on to the baffle next to the cutout – close enough so you can connect the leads of the jackplate
to the speaker.
4) Carefully connect the faston connectors on the end of the cables coming from the jackplate to the connectors
of the speaker.
ANMERKUNG
Do not apply excess force here. If necessary wriggle the connector until it slides on.
One of the wires of the cable is marked red or via a colured line or marking – connect this wire to the connector
marked with a "+" on the speaker.
3.1) CONNECTING THE SPEAKERS ON A 212 CABINET
On the 212 cabinets there are two cable pairs, one pair for each speaker. Make sure to wire both speakers the same way
(red or marked lead to "+"). Otherwise the speakers will be out of phase and the sound will be poor.
21
EN
Publicidad
