Palmer PCAB112BX Manual De Instrucciones página 22

USER MANUAL
5) Place the speaker into the cutout and position the speaker so it matches the holes in the baffle.
ANMERKUNG
Some speakers ship with padding on both sides of the basket, others only have padding on one side. As the speakers
on the Palmer cabinets are front loaded, make sure they are padded on the back. If they are not padded you can
resort heat insulation tape as it is used for windows and doors or similar.
6) Use the supplied screws and fasten the speaker to the baffle in the following order (1-4). Once all screws are tightened,
retighten them.
NOTE
Do not over tighten the screws. Do not use a power-drill or power-screwdriver!
1
4
EN
THIS PART MUST BE PADDED
3
2
22