Ebode IPV68P2P Guia De Inicio Rapido página 11

4. Wireless Connection
1. Choose "Settings" on top of the camera web page, then go to "Network - Wireless
Settings" section on the left side of the screen, then click "Scan".
2. Click the SSID (name of your router) in the list, and the corresponding SSID and
encryption will be filled automatically on the right side of the page. All you need to do is
input the password for your wireless network.
3. Click the "Save" button and disconnect the network cable. Don't power off the camera
until it can be displayed in the IP Camera Tool. If the camera does not show up, (this might
take up to 5 minutes) try unplugging the power cable from the camera and plugging it back
in. It should connect to the wireless network automatically if the encryption password is set
up correctly.
12-11-2015
Click the SSID (name) of your router, and the
corresponding information will be filled in the fields.
- 11 -
Click through different
pages to see other
wireless networks if
there are more than
10.
Input the password of
your router.
ebode IPV68P2P