Ebode IPV68P2P Guia De Inicio Rapido página 14

Click Enable DDNS and click Save. The content
in the Manufacture's DDNS column is the
domain name of your camera.
4. You can see the port of your camera here. If you want to set Remote Access for several
cameras on the same network, you will need to change the HTTPS port for each camera.
5. If UPnP has been enabled in the router, you do not need to perform the following steps.
If UPnP is disabled or fails, you need to select one of the following methods to configure
port forwarding on your router. For these steps, we will be using the TP-LINK brand
wireless router as an example.
 If there is a UPnP function in your router. Choose "Forwarding > UPnP", make sure
that the Current UPnP Status is Enabled.
 If there is no UPnP function in your router.
You need to manually add port(HTTPS port) forwarding, refer to the following steps. You
need go to the "Forwarding > Virtual Servers" panel for setup.
12-11-2015 - 14 - ebode IPV68P2P