Honeywell FC20 ULTAMAX PRO Manual Del Usuario página 21

TROUBLE SHOOTING
Before contacting customer support please check the following:
PROBLEM
Machine doesn't work
Reduced suction
Abnormal sound of the
machine
The floor brush doesn't
spray water
POSSIBLE REASON
The product is not powered-on
or the power level is low
The On/Off button is not
pressed or other switches are
pressed simultaneously
Severe entanglement of the
roller brush body
The dirty water tank is full
The battery pack is not installed
in place
Press On/Off button in upright
state
The dirty water tank has reached
the Max line
Window and dirty water tank are
not installed in place
The roller brush body is
entangled with hair
Dirty filter
Low battery
Blocked suction port
The dirty water in the dirty water
tank has reached the MAX line
Water shortage in the clean
water tank
The spray button is not
pressed
EN | 21
SOLUTION
Charge the machine
Separately press the On/Off
button again
Clean the roller brush body
Clean the dirty water tank
Re-install the battery pack
After tilting the machine, the
roller brush can work
Empty out and clean the dirty
water tank
Re-install
Clean the roller brush body
Clean the filter
Charge the machine
Clean foreign objects in the
suction port
Clean the dirty water tank
Add water to the clean water
tank
Press the water spray switch