THOMSON TT650BT Manual De Instrucciones página 16

Connecting to a Bluetooth Speaker
Note: This turntable has a Bluetooth receiver and can therefore stream your music through
the built-in speakers.
1. Press the Mode button to enter Bluetooth mode: the Bluetooth indicator will flash.
2. Turn on the Bluetooth function of your mobile phone and look for the TT-650
connection.
3. Once the connection is established, the Bluetooth indicator will remain on.
4. Press the VOL+/VOL- button to adjust the volume.
Using Line Out
Requires RCA audio cable (included).
1. Connect the RCA audio cable (included) from the turntable's Line Out socket to your
amplifier.
2. Set playback mode to Phono.
3. The sound of the record being played will then be broadcast by the connected amp/
speakers.
Line out
USB
Insert a USB
media to record
audio from the
turntable.
Audio Output Selector
In Speaker mode the amplifier
is active and the sound comes
out of the turntable's speakers.
In line-out mode, the amplifier
is deactivated in order to
broadcast sound from your
external HiFi system. Volume +
and - functions remain active
but at a reduced volume.
- EN 16 -
When the amplifier
is connected to the
mains, connect the
amplifier cable here.
Power supply
12V-1A