Sage Compact Wave Soft Close SMO650 Guia Del Usuario página 15

Assembly
BEFORE FIRST USE
Before first use remove all promotional
stickers and packaging material. Carefully
unpack the microwave oven and keep
all the packing material until all the parts
of the microwave oven have been found
and the appliance has been assembled.
It is recommended to keep all the packing
material in a safe place in case you wish to
repack the product for shipping purposes.
To remove any dust that may have
accumulated during packing, wash the
turntable roller and glass turntable in warm
soapy water, rinse in clean water then dry
thoroughly. Wipe the interior and exterior of
the microwave oven with a soft, damp cloth
then dry thoroughly.
ASSEMBLING THE GLASS
TURNTABLE
Insert the turntable roller into position in the
indented space in the oven cavity base.
Place the glass turntable on top of the
turntable roller, matching the indents of
turntable roller at the centre area.
INSTALLATION AND TURNING ON
THE MICROWAVE OVEN
• This microwave oven is intended to be used
as a free-standing unit.
• Select a level surface that provides
enough open space for the intake and/or
outlet vents.
• A minimum clearance of 10cm (4 inches) is
required between the microwave and any
adjacent walls.
• Leave a minimum clearance 20cm
(8 inches) above the microwave.
• Do not remove the legs from the bottom of
the microwave.
• Blocking the intake and/or outlet openings
can damage the microwave.
• Place the microwave as far away from
radios and TV as possible.
• Operation of microwave may cause
interference to your radio or TV reception.
• Plug your microwave into a standard
household outlet. Be sure the voltage and
the frequency is the same as the voltage
and the frequency on the rating label.
• The microwave must not be
placed in a cabinet.
20cm
10cm
EN
10cm
15