AEG SR 4353 CD/MP3 Instrucciones De Servicio página 38

English
38
Description of the operating buttons
(13)
Starts the playback.
(17)
• Stops playback.
• In stop-mode to open the cassette deck.
/ (16/14)
Rewinding or fast forwarding of the tape.
CAUTION:
Always press the button (17) between switching over
the cassette and to stop the tape play function. By doing
so, you prevent damage to the cassette tape or on the
device.
(18)
Briefly pauses playback. Pressing the button again will con-
tinue playback.
Cleaning and Maintenance
• Always remove the mains plug before cleaning the
machine.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms Course
CD can not be CD is not inserted
played back. or inserted incor-
rectly.
Batteries too weak. Insert new batteries
CD jumps dur- Check the disc for
ing playback. fingerprints, dirt or
scratches.
Device cannot Device crashes and
be operated. "hangs".
NOTE: Automatic Standby switch
In order to comply with the "ErP 2 (Energy-related
Products)" Ecodesign Directive (2009/125/EC) that aims
at animproved energy efficiency and general environmen-
tal compatibility, the device will automatically switch to
standby after a certain amount of time without a signal. To
use the device again press the
Technical Data
Model: .................................................................. SR 4353 CD/MP3
Power supply: .......................................................AC 230 V~ 50 Hz
Battery operation: .........................................6 x 1.5 V Type D/R20
Power consumption:.................................................................15 W
Protection class: ................................................................................II
Net weight: .............................................................................1.78 kg
Radio section:
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equip-
ment in the domestic waste.
Please return any electrical equipment that you will no longer
Solution
use to the collection points provided for their disposal.
Ensure that the disc is
This helps avoid the potential effects of incorrect disposal on
inserted with the label
the environment and human health.
facing upwards.
This will contribute to the recycling and other forms of reutili-
or operate the device
sation of electrical and electronic equipment.
with the mains lead.
Information concerning where the equipment can be dis-
Check the disc for
posed of can be obtained from your local authority.
fingerprints, dirt or
scratches.
Disconnect the power
supply for 5 sec. Then
switch the device on
again.
/ button (10).
Frequency ranges: .................................FM 88 ~ 108.0 MsHz
..................................AM 540 ~ 1600 KHz