Publicidad
Idiomas disponibles
Idiomas disponibles
English
SPECIFICATIONS
Input power source
Charging voltage
Charging current
Weight
APPLICATIONS
For charging the HITACHI batteries types EB7, EB9, EB12, EB14, EB18 and EB24 series.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
1. Insert the plug of battery charger into the receptacle.
When the plug of battery charger has been inserted into the receptacle, charge status
lamp will blink in red. (At 1-second intervals)
2. Insert the battery to the battery charger.
Insert the battery into the battery charger as shown in Fig. 2. Make sure it contacts the
bottom of the battery charger.
8
All manuals and user guides at all-guides.com
Single phase: AC 120 V 60 Hz
DC 7.2 – 24 V
DC 9A ........................................... 7.2 – 14.4 V batteries
DC 7.5A ........................................ 18 V batteries
DC 6A ........................................... 24 V battery
2.2 lbs (1.0 kg)
WARNING:
Do not use the electrical cord if damaged. Have it
repaired immediately.
Publicidad
