INSTALLATION INSTRUCTIONS
Unpacking and Examining Your Microwave Oven
Remove all packing materials from inside the
microwave oven cavity; however, DO NOT
REMOVE THE WAVEGUIDE COVER, which
is located on the top cavity wall. Read
enclosures and SAVE the Installation/Use
and Care Manual.
Check the microwave oven for any damage,
such as misaligned or bent door, damaged
door seals and sealing surfaces, broken or
loose door hinges and latches and dents
inside the cavity or on the door. If there is
any damage, do not operate the microwave oven and contact your dealer or
VIKING AUTHORIZED SERVICER.
Choosing a Location for Your Microwave Oven on the
Counter
You will use the microwave oven frequently so plan its location for ease of use.
It's wise, if possible, to have counter space on at least one side of the micro-
wave oven. Allow at least 2 inches on the sides, top and at the rear of the
microwave oven for air circulation.
Choosing a Location for Your Built-in Microwave Oven
Your microwave oven can be built into a cabi-
net or wall by itself or above an oven. To install
a microwave oven above a built-in oven, the
applicable trim kits are as follows:
VIKING Designer Series:
• For installation with an electric 27" wide
single oven (DESO170 / DESO171 /
DESO175) use built-in trim kit DMTK275SS.
• For installation with an electric 30" wide
single oven (DESO100 / DESO101 /
DESO105) use built-in trim kit DMTK305SS.
Do not build in above any other gas or electric
oven.
Microwave
oven Front
5
Built-in Trim Kit
Frame Assembly