KTM 61912927044 Instrucciones De Montaje página 34

6 CHANGING THE LOCKING CYLINDER
14
–
Remove pin
–
Take off rocker arm
–
Remove screws
–
Remove the cover with the springs.
Info
Ensure that the springs remain in place.
502013-01
–
Remove plug
502014-01
–
Move the key into top position
–
Push engaging plate
–
Remove the locking cylinder.
Info
It is essential that the key remains in the locking
cylinder.
502015-01
Installing the locking cylinder
–
Grease and mount the O-ring
–
Position and insert the locking cylinder as shown in the
figure.
The holding lug of the locking cylinder adapter is
facing downward.
Engaging plate
501999-01
–
Move the key 90° to the right
–
Mount plug
502016-01
cp
to the right.
cq
with the spring.
cr
with the washers.
cs
.
G
.
bq
into the locking cylinder.
6
(included).
bq
engages.
H
.
cs
.