Panasonic NC-ZA1 Instrucciones De Funcionamiento página 42

How to Clean
Decalcification cycle:
Use this cycle occasionally and/or when the display shows
This decalcification cycle enables simple and effective descaling. This programme runs in 2 phases and it takes approximately
11 minutes and should not be interrupted. When display shows
1
Press
2
Select "descaling programme".
(First phase)
3
Fill the water tank with 250 mL of water and add 125 mL of descaling
agent, then press
4
Press
• Empty the drip tray before starting the cleaning cycle.
GB42
(Continued)
on the main menu.
.
to start decalcification cycle. (Approx. 9 min.)
.
, press and follow steps from 3.
Note
• If is pressed, the display will return to the previous display.
Note
• If is pressed, the display will return to the previous display.
Note
• If is pressed during descaling, the
display indicates to empty the drip tray. To
continue the descaling cycle, press .