Publicidad
STEP 8
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
13
AND MUST BE INSTALLED PROPERLY.
(x32)
Carefully turn your unit on its front side.
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
B
raw
surface
R
E
15
13
Flush bottom edge of the back
panel with the bottom edge of
bottom (E).
You
Tube
Publicidad
