INSTALL BATTERIES AS SHOWN (2 AAA, not included)
Notes:
–
Do not mix old batteries with new ones or mix different types of
batteries together.
–
Remove the batteries if the remote control will not be used for a
month or more. Weak batteries may leak and cause damage.
(Normal battery life is roughly six months.)
IMPORTANT NOTE: Spent or discharged batteries must be recycled or
disposed of properly in compliance with all applicable laws. For
detailed information, contact your local County Solid Waste Authority.
REMOTE CONTROL KEYS
Power Key—Press to turn TV ON or OFF.
Input Key—Press to select the program source to watch:
TV signal or signal from DVD Player or other equipment
you have connected to the A / V jacks.
Number Keys—Press two keys to select a channel.
Example: Press 0 then 6 to select channel 6. For cable
channels 100 through 125, press and hold the 1 key until
C1– – appears. Then press the other two numbers.
Caption Key—(See page 13.)
Menu Key—Use this key with the LM and – + keys to
navigate and adjust features of the on-screen menu system.
(See pages 11 ~ 12.)
Channel Scanning (CH LM) and Volume (VOL – +)
Keys—Press to scan through the channels in memory and
to adjust the volume.
I Be sure batteries are installed correctly.
I Point the remote control toward the TV. Objects between the
remote control may cause misoperation of the remote control
function.
I Cannot select channel with number keys. Press "0" in front
of numbers 1~9. Example: Channel 05.
I Adjusting the volume level: Flashing Right arrow
indicates volume is increasing and flashing Left arrow indi-
cates volume is decreasing.
USING THE REMOTE CONTROL
Need help?
www.sanyoctv.com
Visit our Web site at
Point towards TV
POWER
INPUT
RESET
1
2
3
1
2
3
4
5
6
4
5
6
7
8
9
7
8
9
CAPTION
SLEEP
0
0
MENU
RECALL
CH
VOL
VOL
MUTE
DISPLAY
CH
(Continued on page 10. )
1-800-877-5032
or Call
9