Introduction; Parts And Service; Modifications; Nameplate - HydraMaster HYDRAPORT 1200 Información E Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

INSTRUCTIONS FOR USE
ENGLISH
REVISED DATE

INTRODUCTION

This manual will help you get the most from your HydraMaster dual-surface extractor. Read it thoroughly before operating the machine.
This product is intended for commercial use only.

PARTS AND SERVICE

Repairs, when required, should be performed by your Authorized HydraMaster Service Center, who employs factory trained service personnel, and
maintains an inventory of HydraMaster original replacement parts and accessories.
Call the HYDRAMASTER DEALER named below for repairs or service. Please specify the Model and Serial Number when discussing your machine.

MODIFICATIONS

Modifications and additions to the cleaning machine which affect capacity and safe operation shall not be performed by the customer
or user without prior written approval from Nilfisk, Inc. Unapproved modifications will void the machine warranty and make the
customer liable for any resulting accidents.

NAMEPLATE

The Model Number and Serial Number of your machine are shown on the Nameplate, located at the rear of the machine on the base. This information
is needed when ordering repair parts for the machine. Use the space below to note the Model Number and Serial Number of your machine for future
reference. Be sure to register your warranty online at
http://hydramaster.com/Support/WarrantyRegistration.aspx
MODEL ________________________________________________
SERIAL NUMBER ________________________________________

UNCRATING THE MACHINE

When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so
that it can be inspected. Contact the HydraMaster Customer Care Department immediately to file a freight damage claim at 800.426.1301.
This machine shipped with a replacement impeller kit attached to the dump pump inside the base of the machine. Tip open the tanks to locate the
kit and remove it from the machine for future use. Keep the impeller kit along with this operator manual in a safe place.
WARNING!
The Products sold with this Manual contain or may contain chemicals that are known to certain governments (such as the State of
California, as identified in its Proposition 65 Regulatory Warning Law) to cause cancer, birth defects or other reproductive harm. In
certain locations (including the State of California) purchasers of these Products that place them in service at an employment job site
or a publicly accessible space are required by regulation to make certain notices, warnings or disclosures regarding the chemicals
that are or may be contained in the Products at or about such work sites. It is the purchaser's responsibility to know the content of,
and to comply with, any laws and regulations relating to the use of these Products in such environments. The Manufacturer disclaims
any responsibility to advise purchasers of any specific requirements that may be applicable to the use of the Products in such
environments.
7/2016
56042659 - HydraPort 1200
A - 3

Publicidad

Tabla de contenido
loading

Tabla de contenido