Asus ROG Vulcan Pro Guia De Inicio Rapido página 5

1
et
de
U7425_Vulcan_Pro_QSG.indb 5
To connect the audio cable
1. Connect the audio cable to the headset's audio port on the left ear cup.
2. Connect the audio cable's headphone and microphone connectors to
your computer's headphone and microphone ports.
Activating the noise-canceling function
The noise-canceling function removes ambient noise such as background
noise for a clearer sound quality.
To activate the noise-canceling function
Press the Active Noise Cancellation button on the left ear cup to activate the
noise-canceling feature.
NOTE: There is no need to connect the headset cable if the headset
is used only for the Active-Noise-Cancellation feature.
Using your headset with the ROG Spitfire
1. Connect the headset's microphone and output cable to their respective
jacks on the ROG Spitfire.
2. Plug the ROG Spitfire into your computer's USB port.
3. Go to the Control Panel to change the default input / recording device.
Using Gaming / Surround / Amp modes on ROG Spitfire
Press the Gaming / Surround / Amp button on the ROG Spitfire to enable/
disable each audio mode.
Storing your headset
To store your headset
1. Disconnect the audio cable and microphone.
2. Fold one side, then the other, ensuring that pressure
is applied to the hinges and not on the ear cups.
3. Put your headset and its accessories in the protective
case.
ASUS ROG Vulcan Pro 5
8/15/12 10:14:50 AM