Vortice 12101 Manual De Instrucciones página 47

ENGLISH
PROGRAM
With this option, you can access operating speed setting for six time slots (with start and end times) for each day of the
week and for two pre-set intervals: Monday-Friday and Saturday-Sunday.
Proceed as follows for all desired days and time slots:
NOTE
At the specified intervals, however, the speeds can be changed manually in the "HOME" page, in that case: the message
"Prg" will flash for 30 minutes after which it will return to work at the speed set in the hourly programming, if during the
30
SETUP
DATE&HOUR
PROGRAM
min any other function that modifies the speed intervenes, the 30 min count is reset.
MONDAY
Timeslot1
Timeslot2
Timeslot3
Timeslot4
Timeslot5
Timeslot6
NOTE
The time bands of MON / FRI or SAT / SUN overwrite the single days, during the setting change first the general time
bands, and then set the daily ones. If they are subsequently changed again, the LUN / VEN and SAB / DOM bands will
overwrite the daily ones.
Info
You can view the following system information with this option:
HMI, Board firmware, Configuration files
MAIN MENU
ALARM
SETUP
PROGRAM
MONDAY
TUESDAY
WEDNESDAY
THURSDAY
FRIDAY
SATURDAY
SUNDAY
MON-FRI
SAT-SUN
MONDAY TimeSlot1
00:00
07:30
NIGHT
INFO
S:0.9 6.6
M:0.9 6.4
CFG:6.4
47