Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) Clock/Hazard housing • D) (3) Panel Clips • E) (6) #4 x 3/8" Phillips truss head screws
A
B
Metra. The World's Best Kits.
®
Toyota Tacoma
Visit
MetraOnline.com
for more detailed information about the product and up-to-date vehicle
specific applications
KIT FEATURES
• ISO DDIN radio provision
• 95-8235B = Black
• 95-8235CHG = Charcoal High Gloss
C
MetraOnline.com
2012-2015
D
E
© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
95-8235
I N S TA L L AT I O N I N S T R U C T I O N S
U.S. PATENT # D755,776
TABLE OF CONTENTS
Dash Disassembly ..................................................2
Kit Preparation .......................................................3
Kit Assembly ..........................................................3
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: Please visit metraonline.com
for wiring harness options
Antenna Adapter: Please visit metraonline.com
for antenna adapter options
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• 10mm socket wrench
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 4/3/19 INST95-8235
Publicidad
Manuales relacionados para Metra 95-8235
Resumen de contenidos para Metra 95-8235
- Página 1 When testing the aftermarket equipment, ensure that all factory equipment is connected before cycling the key to ignition. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 4/3/19 INST95-8235...
- Página 2 DASH DISASSEMBLY TEXT PWR VOL 1. Unclip, unplug and remove the climate 4. Remove (8) screws securing the radio control panel. (Figure A) brackets to the radio, then remove the SCAN brackets. (Figure D) 2. Remove (4) 10mm screws securing the radio assembly.
- Página 3 Note: (3) panel clips have been Insert Clock/Hazard switch assembly from 4. Re-connect the clock/hazard assembly provided, only if the factory clips are rear of 95-8235 radio housing trim panel back to the vehicle, then clip the radio missing or damaged. (Figure A) trim panel over the radio assembly.
- Página 4 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 4/3/19 INST95-8235...
- Página 5 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 4/3/19 INST95-8235...
- Página 6 DESMONTAJE DEL TABLERO TEXT PWR VOL 1. Soltar, desenchufar y quitar el panel de 4. Quite los (8) tornillos que sujetan los control de clima. (Figura A) soportes de radio a la radio, luego retire SCAN los soportes. (Figura D) 2.
- Página 7 4. Vuelva a conectar el conjunto de reloj / Nota: (3) los clips del panel se han moldura de la carcasa del radio 95-8235. peligro al vehículo, luego sujete el panel proporcionado, solo si los clips de fábrica...
- Página 8 Tenga el vehículo separado y listo para realizar los pasos de solución de problemas antes de ponerse en contacto con el soporte técnico de Metra / Axxess. EL CONOCIMIENTO ES PODER ® Mejore sus habilidades de instalación y...