PRODUCT SPECIFICATIONS
Motor .................................................................. 18 Volt DC
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with tools to make you careless.
Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Do not use any attachments or accessories not
recommended by the manufacturer of this tool. The use
of attachments or accessories not recommended can
result in serious personal injury.
APPLICATIONS
You may use this tool for the purpose listed below:
General ventilation of most household spaces
NOTICE:
This product is designed to be powered by either a
Ryobi
One+
18V battery pack (DC mode) or by electric
™
™
power (AC mode). Either power source can be used by
installing an approved battery pack or power cord into
the product as described in this manual.
FEATURES
120 V, AC only, 60 Hz
ASSEMBLY
OPERATION
6 – English
Switch ................................................................ Two Speed
WARNING:
Do not attempt to modify this product or create
accessories or attachments not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possible serious personal injury.
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 8.
Place the power switch in the center, or OFF ( O ) position.
Insert the battery pack into the product as shown.
Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured before
beginning operation.
Depress the latches to remove the battery pack.
For complete charging instructions, see the operator's manu-
als for your battery pack and charger.
WARNING:
Always remove battery pack or unplug extension cord
from your product when you are assembling parts,
making adjustments, cleaning, or when not in use.
Removing battery pack or unplugging extension cord
will prevent accidental starting that could cause serious
personal injury.