Publicidad
Idiomas disponibles
Idiomas disponibles
30
HOW TO USE
Control Panel Features (continued)
Change Filter
Change Filter
When the Change Filter icon turns on, the air
filter needs to be replaced. After replacing the
air filter, press and hold the Fresh Air Filter
button for three seconds to turn the icon light
off. Change the air filter approximately every
6 months.
Ice Plus
Ice Plus
This function increases both ice making and
freezing capabilities.
When you touch the Ice Plus button, the
graphic will illuminate in the display and
will continue for 24 hours. The function will
automatically shut off after 24 hours.
You can stop this function manually by
touching the button one more time.
Light
Light
When you press the Light button, the
dispenser light will turn on and the indicator
will appear on the LED display.
Change Water Filter
Change Water Filter
When the Water Filter indicator turns on,
you need to change the water filter. After
changing the water filter, press and hold the
Change Filter button for three seconds to turn
the indicator light off. Change the water filter
approximately every six months.
Door Alarm
Door Alarm
When power is connected to the
refrigerator, the door alarm is initially set
to ON. When you press the Alarm button,
the display will change to OFF and the Door
Alarm function will deactivate.
When either the refrigerator or the freezer
door is left open for more than 60 seconds,
the alarm tone will sound to let you know
that the door is open.
When you close the door, the door alarm
will stop.
[
]
( On some
models)
Lock
Lock
The Lock function disables every other button
The Lock function disables every other button
on the display.
on the display.
When power is initially connected to the
refrigerator, the Lock function is off.
If you want to activate the Lock function to
lock other buttons, press and hold the Lock
button for three seconds or more. The Lock
icon will display and the Lock function is now
enabled.
To disable the Lock function, press and hold
the Lock button for approximately three
seconds.
Power Saving Mode
Power Saving Mode
When the refrigerator is in the Power Saving
Mode , the display will remain off until a door
is opened or a button is pressed. Once on,
the display will remain on for 20 seconds.
CAUTION
Display Mode (For Store Use Only)
The Display Mode disables all cooling in the
refrigerator and freezer sections to conserve
energy while on display in a retail store. When
activated, OFF will display on the control panel
and the display will remain on for 20 seconds.
To deactivate / activate:
With either refrigerator door opened, press
and hold the Refrigerator and Ice Plus buttons
at the same time for five seconds. The control
panel will beep and the temperature settings
will display to confirm that Display Mode
is deactivated. Use the same procedure to
activate the Display Mode.
Publicidad
