Descargar Imprimir esta página

Kasanova NNE000014NOC Manual De Instrucciones página 23

Freidora de aire

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

AIR FRYER
" key for 2s, and the speed will increase or decrease automatically at 5 times
per second. The step of quick adjustment is 5 °C, and there will be no beep
after long press; The temperature setting range is 80-200 °C (not adjustable).
5. Time setting:
Gently touch the "temperature/time" key to turn on the time icon (the
temperature icon goes out), the "+/-" key light will turn on, and the digital
display time will flash (it will not flash during adjustment, stop for 1s, and stop if
it is not adjusted for 5 times). At this time, you can press the "+/-" key to adjust
the time, and the time step is 1min when the short press, the buzzer will give
a short beep; Press and hold the "+/-" key for 2s, and the speed will increase
or decrease automatically at the rate of 5 times per second. The step of quick
adjustment is 1min, and there will be no beep after long press; The time
setting range is 1-60min (not recyclable)
-
Press the "temperature/time key" to switch the current display
temperature to time and the current display time to temperature; The
"temperature/time" switch button can be operated circularly;
6. Start working state
Enter the working mode:
-
After selecting the menu, press the "Start/Pause" key (buzzer
beeps briefly), the selected menu light will be on for a long time, and other
menu lights will be off, and the "Menu key light", "Plus/Minus key light",
"Temperature/Time key light", "Start/Pause key green light", and "Furnace
light key light" will be on for a long time; When the machine is in operation,
pressing the "menu key" is invalid, but the temperature and time can be
adjusted; Countdown time by minute; Display temperature/time alternately for
5 seconds;
-
Conditions for entering the working state: 1. The basket is closed;
7. Pause state
-
During work, press the "Start/Pause key" briefly, the green light of
"Start/Pause key" flashes, and the machine enters the pause state; The
heating tube stops heating, the digital tube stops counting down, and the
fan delays heat dissipation for 20 seconds before stopping (the furnace
temperature is lower than 120 degrees without delaying heat dissipation);
During the pause, you can select the menu and adjust the temperature/time
settings;
-
Press the "Start/Pause key" again, the machine will return to its
original working state, and the "Start/Pause key" green light will be on for a
long time;
-
The machine will shut down automatically when it stays in the
23

Publicidad

loading