Publicidad
Idiomas disponibles
Idiomas disponibles
AIR FRYER
24
suspended state for 30 minutes;
8. Shutdown status
-
During operation, press and hold the "Start/Pause key" for 2 seconds,
the nixie tube will display "OFF", all LED lights will go out (except the red light
of the Start/Pause key will be on for a long time), the heating will be stopped,
the fan will delay heat dissipation for 20 seconds before stopping (the furnace
temperature is lower than 120 degrees without delaying heat dissipation), the
nixie tube will go out, and the machine will be shut down;
-
When the work countdown is over, it will ring for five times, and the
digital display "End" will stop heating. The fan will delay cooling for 20 seconds
before stopping (the furnace temperature is lower than 120 degrees without
delaying cooling). The red light of "Start/Pause key" will be on for a long time,
the other lights will be off, the digital tube will be off, and the machine will be
shut down; At this time, briefly press the "Start/Pause" key to return to standby;
9. Power failure memory:
-
Power off during operation, power on within 2 hours, continue to
operate according to the state before power off, and power on more than 2
hours, operate according to the initial power on state.
FAQ ANALYSIS
When the following abnormal phenomena occur during use, it is not entirely
the fault of the machine. Please carefully check it again before sending it for
maintenance
Symptoms
Touch screen
does not light
Product reason
power failure
The power socket is not ener-
gized or has poor contact
The power supply voltage is
inconsistent with the rated
voltage of the product
Circuit board fault
Exclusion method
Check and maintain power supply
equipment
Send to the designated maintenance
department for maintenance
Publicidad
