cecotec Cecofry Full InoxBlack 5500 Connected Pack Serie Manual De Instrucciones página 51

you wish to end the cooking process, hold down this icon (12) for 3 minutes. If you do not
press any other icon for the next minute after pausing, the fryer will enter standby mode
and will beep 3 times.
• When you hear an alarm, it means that the preparation time has come to an end. Use the
handle (4) to remove the basket (3). Depending on the type of ingredients, steam may be
released, so be careful when removing the basket (3).
• Check if the ingredients are ready. If not, put the basket (3) back inside the device and set
the timer for a few more minutes.
• To remove the ingredients, place the basket (3) on a heat-resistant surface.
• Place the basket ingredients on a proper container. Use tongs to remove ingredients, as
this will prevent residual cooking oil from dripping onto the container. Be careful not to
burn yourself. Do not place the basket (3) upside down to remove the food.
• You can continue using the fryer if desired or you can finish the cooking process. To do so,
hold down the Power icon (12) for 3 seconds.
Control panel
Power icon
- When the basket (3) and the rack (5) are properly placed inside the air fryer, the Power icon
(12) will light up.
- To turn the air fryer on, press the Power icon (12): the air fryer will beep, and the display will
show 200ºC / 18 minutes alternately.
- You can set the desired time and temperature or select a default function. Press the Power
icon (12) to start the selected function or the manual setting. If you press this icon again
(12), the fryer will pause.
- To finish the cooking process, hold down the Power icon (12) for 3 minutes.
Wi-Fi/Mode icon
The air fryer has a Smartphone App that connects the device through W-Fi and allows for
complete control of the cooking processes.
Device pairing
By scanning the following QR code, you can download the APP on Android
and iOS.
Pairing the device
The pairing of the device with the APP can be done in two ways, both of
which are explained below:
First of all, you need to enable the Bluetooth, connect to a 2.4 GHz Wi-Fi network, and download
the Cecotec APP. Once you have downloaded the APP and registered, you will be able to pair
the device.
CECOFRY FULL INOXBLACK 5500 CONNECTED PACK / CECOFRY FULL INOX 5500 CONNECTED PACK
03319_03320_Cecofry Full InoxBlack/ Full Inox 5500 Connected Pack_IM_YV_01230215.indd 51 03319_03320_Cecofry Full InoxBlack/ Full Inox 5500 Connected Pack_IM_YV_01230215.indd 51
ENGLISH
51
15/2/23 18:26 15/2/23 18:26