White Balance; Slow Response Of The Leds - IMG STAGELINE ODC-100/RGB Manual De Instrucciones

2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER . The display indicates
,
4) Press the button UP or DOWN repeatedly until
the display indicates
5) Press the button ENTER and then use the but-
ton UP or DOWN to select:
= maximum brightness
= brightness reduced to 33 %
6) To be able to control the spotlight by DMX,
use the button MENU to return to the highest
menu level .
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected .

5.2 White balance

The factory setting of the spotlight is such that
the colours red, green and blue – when set to
maximum brightness – result in a specific shade
of white . This shade of white may be changed
to appear warmer or cooler, e . g . to level out the
differences to other spotlights when they are
controlled together with the ODC-100 / RGB or
PARC-100 / RGB .
1) Press the button MENU repeatedly until the
highest menu level has been reached .
2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER . The display indicates
.
4) Press the button ENTER again . The display now
indicates ,
000 and 255 .
= brightness of colour red
= brightness of colour green
= brightness of colour blue
5) Use the button ENTER to select the three
setting options one after the other; use the
button UP or DOWN to set the brightness for
the individual colours and thus to create the
shade of white desired .
6) To activate the shade of white that has been
set:
a) Press the button MENU repeatedly until the
display indicates
22
.
, , ,
.
.
or and a number between
again .
b) Press the button DOWN twice so that the
c) Press the button ENTER . The display
or .
d) Press the button UP or DOWN repeatedly
e) Press the button ENTER . If the display indi-
7) To be able to control the spotlight by DMX,
press the button MENU twice to return to the
highest menu level .
MENU to select the operating mode and then
press ENTER to activate the mode selected .

5.3 Slow response of the LEDs

LEDs immediately respond to a change of the
brightness setting . To simulate the slow response
of standard lamps, the response can be set in
four steps . For the 10-channel mode
setting is made via DMX channel 9 (
For 3-, 4- and 5-channel mode, make the setting
as follows:
1) Press the button MENU repeatedly until the
highest menu level has been reached .
2) Press the button UP or DOWN repeatedly until
the display indicates
3) Press the button ENTER . The display indicates
4) Press the button UP or DOWN repeatedly until
the display indicates
5) Press the button ENTER . The display indicates
the current setting:
Use the button UP or DOWN to select the
setting desired .
6) To be able to control the spotlight by DMX,
use the button MENU to return to the highest
menu level .
MENU to select the operating mode and then
press ENTER to activate the mode selected .
display indicates
changes to ,
or .
until the display indicates
cates , the shade of white is activated;
if it indicates , use the button UP or
DOWN to set the indication to
For independent operation, use the button
, , ,
= immediate response
= lslightly slow response
= slow response 2
= slow response 3
= slowest response
For independent operation, use the button
.
, , ,
.
.
, the
☞ Fig . 8) .
.
, or .
.