VebaBox TUC2000 Manual Del Usuario página 17

6. Cleaning and maintenance
WARNING: Never allow water or other liquids to enter the thermal
unit and electronics.
•
Turn off the product and disconnect all power cables.
•
The VebaBox is not designed for automatic defrosting (not
necessary for normal operation). If excessive frost builds up,
shut off the unit and wait until the ice melts. Do not remove
the ice by mechanical means.
•
Clean the product with a damp cloth, using a detergent if
necessary. NOTE: do not use abrasive or corrosive agents
as these may damage the surface.
•
Carefully dry all remaining damp parts with a dry cloth.
•
The door seals must be greased every three months to
prevent the doors from jamming or cracking. This can be
done with, for example, medical vaseline.
•
Repairs and maintenance must be carried out by qualified
personnel. It is recommended to check the unit and clean
the internal heat exchangers at least once a year.
7. Packaging material and safe disposal of products
The packaging protects the product from transport damage. Store
the original packaging parts for possible future transport of the
thermal unit.
Old electrical and electronic products usually contain
valuable materials. However, they also contain harmful
substances that have been necessary for the products to
function properly and safely. The disposal of such products
or impropriate handling of these substances can be harmful to health
and the environment. Dispose of the product in a municipal
collection depot for electrical and electronic equipment. The
TUC1800/2000-usm. rev.01
© 2020 VebaBox B.V. User Manual VebaBox+TUC1800 or TUC2000
17