Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTUCTION
1. Place the product on a level ground at least 2m/6.5ft away from
any other objects (such as fences, trees, water sources, hanging
branches, clotheslines or wires). Make sure that the area around the
product is safe. Check for sharp objects on the ground, and keep
the blower and power cord away from water and moisture.
2. The slide surface should not be located under the sun as it can
dazzle children when using the bouncer.
3. Place the blower in an area where it will not suck in dust or
leaves. Keep the blower and power cord away from children and
water. Note: Please ensure that the power supply is safe and
reliable. The blower should remain on and continue to inflate the
bouncer during use. After stretching the air pipe, position the
blower at the end of the air pipe. Wrap one end of the pipe around
the blower and tie it tightly after blowing out the wind. The inflation
tube should be straight and not twisted. If necessary, readjust the
position of the blower. Then firmly fix the blower into the ground
using the stakes.
04
Publicidad
