BUTURE VC50 Manual Del Usuario página 15

②
Remove Dust Cup and Filters
•
Remove dust cup from main body.
③
Clean and install dust cup/Filters
•
Clean dust cup and filters with water. Make sure that the dust cup and filters have dried before use.
•
Installation steps:
1. Twist the stainless steel filter counterclockwise and put it into the dust cup.
2. Put in a sponge strainer.
3. Plug the HEPA filter into the motor.
4. Twist the dust cup clockwise to connect it to the motor.
•
Rotate clockwise to remove the stainless
steel filter.
tech-support@ibuture.com
•
Remove HEPA filter from main body.
13. EN