Adjusting The Focus - Bresser 16x30 Instrucciones De Uso

Note:
When the batteries do fi nally need replacing, this will
become evident when the green power LED (7) starts
to fl ash, which is the indication that the power con-
tained within the batteries is now low and the batter-
ies therefore need replacing. The image stabilization
feature will obviously stop working once there is in-
suffi cient power in the batteries, so it is recommend-
ed that the batteries be replaced when the green light
no longer remains constant and starts to fl ash.
Twist-up Eyecup (2)
Screw in the twist-up eyecup (2) to use the mo-
nocular while wearing glasses. If you are not wearing
glasses, unscrew the eyecup to achieve the required
distance from the pupil.
12

Adjusting the Focus

You can use the objective focus adjustment (3) to
change the focus of your monocular. To focus, look
at a distant object through the monocular and turn the
objective focus adjustment (3) until the object comes
into focus.
Using the Image Stabilization Feature
This monocular can be used with or without the image
stabilization feature switched on, but switching it on
will make viewing at higher magnifi cations much eas-
ier! To switch this feature on, having fi rst inserted the
batteries, simply slide the on/off switch to the "on"
position and when you do this, a small green light will
illuminate on the corner of the monocular very near
the on/off switch. It should immediately become obvi-
ous that this feature is switched on because the view-
ing image will no longer be so sensitive to the natural
trembling of your hand(s).