Publicidad
Idiomas disponibles
Idiomas disponibles
Defective or worn out batteries must be recycled
according to the guidelines 91/157/EEC.
Service
BTI Befestigungstechnik GmbH & Co. KG
Postfach 40
74665 Ingelfingen
Salzstraße 51
74653 Ingelfingen-Criesbach
Telefon: ......................................... 0 79 40/141-0
Telefax: ...................................... 0 79 40/141-64
Internet: ..............................................www.bti.de
Safety Notes
WARNING! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the
warnings listed below refers to your mains operated
(corded) power tool or battery operated (cordless) pow-
er tool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
Nickel-cadmium-battery:
If your product is equipped
with a nickel-cadmium-bat-
tery, the battery must be
collected, recycled or dis-
posed of in an environmen-
tally-friendly way.
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following stand-
ards or standardization documents. EN 50 144
(Battery powered products) and EN 60 335 (Bat-
tery charger) according to the provisions of the di-
rectives 73/23/EEC, 89/336/EEC, 98/37/EC.
ppa. U. Delz
BTI Befestigungstechnik GmbH & Co. KG
74653 Ingelfingen
Subject to change without notice
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords in-
crease the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
English - 6
i.V. G. Hub
Publicidad
