Dongcheng DSP05-180 Manual Del Usuario página 4

damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use
of an RCD reduces the risk of
electric shock.
3) Personal safety
a) Stay alert, watch what you
are doing and use common
sense when operating a
power tool. Do not use a
power tool while you are tired
or under the influence of
drugs, alcohol or medication.
A moment of inattention while
operating power tools may result
in serious personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as a dust mask,
non-skid safety shoes, hard
hat or hearing protection used
for appropriate conditions will
reduce personal injuries.
c) Prevent unintentional
starting. Ensure the switch
is in the off-position before
connecting to power source
and/or battery pack, picking
up or carrying the tool.
Carrying power tools with
your finger on the switch or
energising power tools that have
the switch on invites accidents.
d) Remove any adjusting key
EN
4
or wrench before turning the
power tool on. A wrench or a
key left attached to a rotating
part of the power tool may result
in personal injury.
e) Do not overreach. Keep
proper footing and balance at
all times. This enables better
control of the power tool in
unexpected situations.
f) Dress properly. Do not wear
loose clothing or jewellery.
Keep your hair and clothing
away from moving parts.
Loose clothes, jewellery or long
hair can be caught in moving
parts.
g) If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these are
connected and properly used.
Use of dust collection can
reduce dust-related hazards.
h) Do not let familiarity
gained from frequent use of
tools allow you to become
complacent and ignore tool
safety principles. A careless
action can cause severe injury
within a fraction of a second.
4) Power tool use and care
a) Do not force the power tool.
Use the correct power tool for
your application. The correct