Bimar FT-30MB Folleto De Instrucciones página 10

 Do not use the appliance with a timer or a programmer or with a
system that can switch on the appliance automatically, to avoid risk
of fire, since a fire risk exists if the heater is covered or positioned
incorrectly.
 In the event of a breakdown or poor operation, turn the fan heater
off and ask for professionally qualified help.
 Ensure that the fan is switched off from the supply mains before
removing the guard.
INSTALLATION
 After removing the packing materials, check the integrity of the heater; if you are unsure,
do not use it and ask for qualified professional help. The packing materials (plastic bags,
polystyrene foam, nails, etc.) must be kept out the reach of children because they are
potential sources of danger. All packaging elements must be disposed of according to their
raw material (see the symbol stamped on each one) and according to the provisions of their
municipality. The bag, which is unmarked due to its small size, therefore you have to follow
the procedures for the disposal of their municipality. Attention: any stickers or advertising
material applied to the grid removed before using the appliance. The manufacturer declines
all responsibility in case this is not safe working practices will be respected.
 Before connecting the appliance, check that the voltage shown on the data plate matches
that of your electricity, and that the electric plug is grounded. In the event of
incompatibility between the electric outlet and the plug of the appliance, have the outlet
replaced with another more suitable type by professionally qualified personnel, who will
make sure that the section of the wires of the outlet is appropriate for the absorbed power
of the heater. In general, the use of adapters or extension cords is not recommended; if
their use is indispensable, they must conform to existing safety standards and their current
capacity (amperes) must not be less that the maximum of the heater.
 The power socket must be easy to reach so the plug can be removed quickly in case of
emergency.
 Do not place the fan on a shelf and/or near sinks or other container of liquids (minimum
distance of 2 meters) to avoid the risk of it falling in.
 Keep the fan far away from fabrics (curtains, etc.) or unstable materials that could obstruct
the air intake grille; make sure that the front is free of unstable materials (dust, etc.).
 Make sure that the electric cord is not touching rough, hot or moving surfaces and not
twisted or wrapped around the appliance.
 Stand the appliance on a horizontal, flat surface or table; do not stand on a inclined plane
(the appliance could upset).
 Do not place the appliance near an open flame, cooking or other heating appliance.
10/36