Dometic MD281 Instrucciones De Montaje Y De Uso página 15

proSafe
8.3 Emergency opening using master code
The master code is necessary if guests have left the safe locked or have for-
gotten their code.
Opening safe with the master code
ENTER PIN 6X
➤ Press the ENTER button.
➤ Enter the correct six digit master code.
➤ Press the ENTER button.
✓ The display shows the message DELAY. The door opens automatically
after ten seconds.
Changing the master code
A
NOTICE!
 If you forget your master code, nobody can access the safe
any more (not even the manufacturer). No resetting, or similar
action, is possible.
 Therefore note down the master code and store it very care-
fully in a safe location.
 The safe has a factory setting code. We strongly recommend
that you change this code for security reasons.
You can change the factory setting code (210104). The safe must be locked
for this.
EN
ENTER
Using the safe
15