Dometic MD281 Instrucciones De Montaje Y De Uso página 9

proSafe
7 Installing safe
7.1 Notes on installation
A
NOTICE!
The safe must only be installed by qualified specialists.
Follow the instructions when installing.
 Carefully check the safe for damage once you have removed it from the
packaging. If there is visible damage, contact the manufacturer (see rear
of safe for addresses).
 Install the safe on a flat and even surface.
 Select a location for installation which is a sufficient distance from heat
sources (e.g. radiators). Avoid installing in locations with temperatures of
under 0 °C and over 45 °C.
 Avoid damp ambient conditions (e.g in the bathroom and swimming pool)
in order to avoid condensation forming in the device.
 Select a fastening material (screws with plugs, if necessary) which is
appropriate for the base.
 For safes with sockets (optional), ensure that they are located close to a
socket to which the safe can be attached.
 For safes with sockets (optional) there must be a clearance of 20 mm at
the back for the connection cable.
EN
Installing safe
9