Publicidad
Idiomas disponibles
Idiomas disponibles
5. INSTRUCTIONS FOR USE
5.1.
Preliminary charging operations
During the entire charging process, DO NOT remove the charging connector from
the electric vehicle. Only remove the charging connector from the vehicle when
charging operations have ended, or have been halted following the appropriate
procedure. In either case, undue force must not be used.
Removing the charging connector from the vehicle during the charging process can cause
serious damage to property or people.
Before starting a new charging session:
Ensure the product and its connectors are perfectly intact, dry and free of any impurities.
Do not insert fingers or objects into the socket.
Make sure the product is not, and has not been, exposed to heat sources, explosive or
inflammable substances.
Ensure the electric vehicle is compatible with the product's technical features.
Do not use adapters or extensions not specified by Free2move eSolutions S.p.A. as they may
damage the product and create safety hazards for the user. eProWallbox Move must only be
used according to the operating parameters specified and at an ambient temperature
between -25 ºC and 50 ºC.
Vehicle adapters must not be used to attach a connector to a vehicle socket.
Adapters between vehicle socket and plug should only be used if specifically designated and
approved by the vehicle manufacturer or the manufacturer of the electric vehicle's power
supply equipment, in accordance with national requirements. Such adapters must, however,
comply with the requirements of the IEC 61851-1 standard and other relevant standards
governing both the plug and socket of the adapter. The adapters must in any case be marked
with specific indications for use permitted by the manufacturer (e.g. IEC 62196).
Keep the charging cable out of the reach of children.
Be careful not to step on the connector or cable.
176
Publicidad
