Descargar Imprimir esta página

Orbegozo BV 6500 Manual De Instrucciones página 9

Publicidad

Idiomas disponibles

Idiomas disponibles

BV 6500
Do not try to open the housing yourself! Do not introduce
l
any kind of objects into the housing.
Do not ever try to repair the unit yourselves. There is
l
danger from electrical shock!
Do not let the power cord hang over sharp edges and
l
keep it away from hot objects and open flames. Pull the
plug itself to remove it from the plug socket.
The cable as well any extension cable required should be
l
laid such that there will not be any risk of anyone pulling
it inadvertently or tripping over it.
When mixing hot liquids/foods excess pressure may build
l
up inside the blender and this could make the lid come off
and the contents splash out. We therefore recommend
that you avoid mixing excessively hot foods and that you
only put very small quantities of hot liquids or foods into
the blender.
Do not use the blender for very hard food products, such
l
as bones, shelled nuts, frozen meats etc., which could
either damage the blade or cause the motor to seize.
DESCRIPTION
Your blender has been designed for the following applications: chopping and
mashing fruits and vegetables; preparing smoothies, shakes and juices; preparing
cold soups; preparing dressings, dips and sauces. The maximum capacity of the
appliance is 1500 ml.
The appliance is suitable for indoor use only.
The appliance is suitable for domestic use only.
Before you proceed, we need you to pay attention to the following notes:
- The appliance has been designed for mixing cold and lukewarm ingredients
(max. 55 °C).
It is recommended not to use the appliance for mixing hot liquids and solids. Hot
liquids and solids can easily cause the jar to break and the jar lid to abruptly
come off the appliance due to steam pressure. Keep the jar lid pressed with your
hand when mixing lukewarm liquids to prevent leakage.
OPERATION
1. Connect the power.
2. This unit have safety design, it do not work if the jar is not install on main body properly.
3. Turn the turning knob P/0/1/2/to position 0 in order to make sure the unit is turned off.
9

Publicidad

loading