Publicidad
Idiomas disponibles
Idiomas disponibles
Wall-mount adjustment
once the wall mount is installed, the position of your tV can be easily adjustable.
tV rear Panel
Serial Cable(P to P)(not supplied)
Entering the menu
. Press the mEnu button to display the menu.
Press the ▲ or ▼ button to select "Setup", then press the EntEr button.
. Press the ▲ or ▼ buttons to select "Wall-Mount Adjustment",
then press the EntEr button.
. Adjust to the desired position using the ▲,▼,◄,► buttons.
4. Press the ExIt button to exit.
If you press an arrow button when no OSD is displayed on the TV screen,
the Adjustment screen appears.
When you turn the power off, your TV moves to the initial installation position.
When you turn the power on, your TV moves to the last
remembered position you adjusted.
using the remote Control buttons
button
Wall-mount angle
adjustment
Reset
Remembering the
position and moving
to the remembered
position
green
red
button yellow
button
button
For installation, refer to the Installation Manual provided.
For product installation and the installation and moving of the wall mount, make sure to consult a
specialized installation company.
This installation manual is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer
(Sold separately)
operations
Tilt Up, Tilt Down, Move right, Move left
Moves to the initial installation position
1. Select the direction buttons of the remote control.
2. Press the red button (Select Position 1).
3. Adjust the set to a desired position following the wall mount operating
4. The position you adjusted last is memorized as Position 1.
5. By using the green button (Select Position 2), and the yellow button
6. You can save 3 respective positions to the red button (Select Position 1),
7. If you additionally move the set from a saved position, the last position is
auto Wall-mount
procedures.
(Select Position 3), you can save positions according to the procedures
above.
green button (Select Position 2), and yellow button (Select Position 3).
If you press a button, the set automatically moves to that saved angle.
saved as the "final position".
English - 56
tV
Setup
▲More
light Effect
: Watching mode On ►
Wall-mount adjustment
home theater PC : off
Energy Saving
: off
aV Color System : Auto
hDmI black level : normal
PIP
move
Enter
Wall-mount adjusment
Position
Position
adjust
Center
Info
►
►
►
►
►
►
return
Exit
Publicidad
