Publicidad
Idiomas disponibles
Idiomas disponibles
-
Take out the contents of the bin and position the sponge filter and the bag filter.
-
Insert the suction pipe into the hole at the side of the bin and tighten securely.
Hose connection for VACUUM FOR SOLID AND LIQUID FUNCTION
- To use the machine for solid and liquid vacuum mode, only connect the plastic pipe in the upper fitting
(fig.1)
Connection of the hose for ASH CLEANER FUNCTION
If the item is to be used with ash cleaner function, insert the metal pipe complete with the suction nozzle
into the hole at the side of the bin (fig.1)
Starting and stopping the equipment
Put the plug into a socket and press the switch. The product will start operating (fig.2)
The vacuum power can be regulated by sliding the regulating switch (fig.3)
Vacuuming liquids
Before vacuuming liquids remove the bag filter and place the sponge filter. The product is provided with a
float device and sponge filter to protect the motor from the vacuumed liquids.
CLEANING AND STORAGE
Before carrying out any operation, make sure the product is not connected to the mains.
Cleaning
Clean the plastic parts using just a suitable soft cloth. Do not use aggressive products (solvents, cleansing
agents), or abrasive sponges, sharp objects or those with cutting edges.
Never immerse the product in water or in any other liquid.
Cleaning the bin:
After vacuuming or when the bin is full of dust/liquid, the suction power decreases considerably.
In this case, the plug must be removed and the bin emptied. To do this, release the two hooks, remove the
top lid, the sponge filter and the cloth filter. Then empty out the dust or liquid. Replace the top lid and secure
it in place with the two fastening hooks.
Storage
Store in a dry place under lock and key or out of children's reach.
fig.1
fig.2
fig.3
Publicidad
