Descargar Imprimir esta página

Porter Cable 290 Manual De Instrucciones página 5

Publicidad

Idiomas disponibles

Idiomas disponibles

GENERAL SAFETY RULES
Maintain power tools. Check for misalignment or binding of moving
e)
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power
tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools
f)
with sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance
g)
with these instructions and in the manner intended for the particular
type of power tool, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
5)
Battery tool use and care
a)
Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a risk of
fire when used with another battery pack.
b)
Use battery tools only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal
c)
objects like paper clips, coins, keys, nails, screws, or other small
metal objects that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a
fire.
Under abusive conditions, liquid may be ejected from the battery.
d)
Avoid contact. If contact accidentally occurs, flush with water. If liquid
contacts eyes, seek additional medical help. Liquid ejected from the
battery may cause irritation or burns.
e)
Ensure the switch is in the off position before inserting battery pack.
Inserting the battery pack into power tools that have the switch on
invites accidents.
6)
Service
a)
Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
continued
5

Publicidad

loading

Este manual también es adecuado para:

290-ca