Epson TM-U200A Serie Manual Del Usuario página 2

Printer Parts
1
Type A
DIP Switch Tables
Serial
SW Function ON
1-1 Data reception Ignored
error
1-2 Receive buffer 40 bytes
capacity
1-3 Handshaking XON/XOFF
1-4 Word length 7 bits
1-5 Parity check Yes
1-6 Parity selection Even
1-7 Baud rate 4800 bps
1-8 Busy condition BUSY when
receive
buffer is full
2-1 Print column 42/35
selection
7 × 9 font/
9 × 9 font
2-2 For internal use. Do not change.
2-3 Type A For internal use. Do not change.
Types B & D Pin 6 Enabled
reset signal
2-4 Type A Undefind.
Types B & D Pin 25 Enabled
reset signal
2-5, For internal use. Do not change.
2-6
2-7 Type A Pin 6 reset Enabled
signal
Types B & D For internal use. Do not change
2-8 Type A Pin 25 Enabled
reset signal
Types B & D Undefined.
2
Type B and
two color
Type D
Parallel
OFF SW Function
Prints"?" 1-1 Auto line feed
1-2 Receive buffer
ANK Model: capacity
1000 bytes
Multilingual
model: 512 bytes
1-3- Undefined
DTR/DSR 1-7
8 bits 1-8 Busy condition
No
Odd
2-1 Print column
9600 bps selection
7 × 9 font/
BUSY when
9 × 9 font
offline or receive
buffer full 2-2 Internal use. Do not change.
40/33 2-3 Type A Internal use. Do not change.
Types B & D Undefined.
2-4 Type A Undefined.
Types B & D Pin
31 reset signal
2-5, For internal use. Do not change.
Disabled
2-6
2-7 Type A Undefined.
Types B & D Internal use. Do not change.
Disabled
2-8 Type A Pin 31
reset signal
Types B & D Undefined.
Disabled
Disabled
3
Single
color
Type D
ON OFF
Enabled Disabled
40 bytes ANK Model:
1000 bytes
Multilingual
model: 512 bytes
BUSY when BUSY when offline
receive or receive buffer
buffer is full full
42/35 40/33
Enabled Disabled
Enabled Disabled