sleep8 Power Eyes Manual Del Usuario página 5

Massager Operating Instructions
BEFORE USE
• Check the availability of the device and components.
• Fully charge the massager.
• Be sure to take out contact lenses and eyeglasses.
Turn on the massager only after you put it on your eyes in order not to damage
the air pad due to over-pressure.
Do not start the device if the power and power supply voltage are out of range
or stay unstable.
HOW TO CHARGE THE DEVICE
1. Connect the USB port of the massager to an external power source using the
USB cable.
2. Connect the charger to the socket (100-240 V ~, 50/60 Hz). When the device
is connected to the charger the LED will turn blue.
3. The charge will take 3 hours.
OPERATING PROCEDURES
1. Put the Massager on your eyes.
2. Be sure that the Massager fits tightly to your face but does not cause any
discomfort. You can adjust the way it ts by using a buckle on the elastic strap.
3. Start the device by pressing and holding the button : After the switch on
the LED panel goes purple. The massage with warming effect and playing
music will start automatically after switch on.
4. To complete using the Massager press and hold the button. The LED
blinks off.
5. The Massager automatically stops working in 15 minutes. To resume work
press and hold the button.
POSSIBLE MASSAGE MODE RANGE
1. Delicate air-compression massage.
2. Vibromassage of moderate intensity.
3. All-in massage with interleaving air-compression and vibromassage
supplemented by the light warming effect.
4. The default mode is air-compression massage with the light warming effect.
4