Publicidad
Navigation Overview
Once the IPR screen appears, you can start adjusting the DSP processor. Pressing the encoder will bring you to the main menu.
The encoder knob to the right of the display is used to navigate and control the DSP functions. The Channel A and B controls to the
left of the display are also encoders but are dedicated to adjusting input gain for each channel. Turning the encoder knob to the right
of the display will allow you to scroll through the Main Menu selections. The Main Menu not only allows you to select a process for
editing, but also provides a quick view of which processes are activated.
From left to right the menu selections are: Input Mode, Volume, Crossover/Band-Pass Filters, Equalization, Delay, Limiting, Memory
and Lock.
Input Mode
Volume
Crossover / Band-Pass Filters
Equalization
Delay
Limiting
Memory Lock
28
Publicidad
