Descargar Imprimir esta página

VITO PRO POWER VIPP600 Manual De Instrucciones página 28

Pistola de pintura

Publicidad

Idiomas disponibles

Idiomas disponibles

Keep third parties away from the power tool's area of
operation. Never work while animals or people, especially
children, are in the danger zone.
Clothing worn during the paint sprayer running must be
adequate, tight and closed, for example, a work boiler suit.
Do not wear loose clothing or jewelry. Keep hair, clothing
and gloves away from suction ports and rotating parts.
Keep the work area clean, organized and well lit (250 to 300
lux), thus decreasing the risk of accidents.
Control and safety devices installed on the power tool may
not be removed or inhibited.
Do not cover the power tool during use. To avoid the risk of
overheating the power tool, keep ventilation slots clean and
clear to always allow air flow.
Before performing cleaning, adjusting, repairing and
maintenance tasks, always unplug the power cord.
Replace worn out or damaged parts immediately, so that
the power tool is always in a safe operating condition.
Cleaning:
The power tool should be thoroughly cleaned thoroughly
after each use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out, all other works must be
performed by an official dealer.
If any components or safety devices are removed for
maintenance
works,
immediately and correctly.
they
must
be
repositioned
Servicing double insulated machines requires extreme care
and knowledge and must only be carried out by a qualified
technician. Replacement of parts in a double insulated
power tool must be carried out using parts identical to the
original ones.
Use only VITO-approved accessories for this machine or
technically identical parts. Failure to do so may result in
personal injuries or damages to the paint sprayer. If in
doubt, if you lack knowledge or resources, you should
contact an official dealer.
Your paint sprayer should only be serviced by the
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts.

Publicidad

loading