Publicidad
Idiomas disponibles
Idiomas disponibles
Things that can save you from
making unnecessary phone calls
What to do if ...
... the appliance doesn't
work ...
... the appliance doesn't
work and the safety pilot
light comes on ...
... the safety pilot light
comes on frequently ...
... the appliance fails to cool
the air properly ...
28
Make sure that the appliance is plugged in properly.
Make sure that the control knob is not set to "off" .
Make sure that there is power in the mains
electricity supply and all the fuses are in working
o r d e r.
Set the thermostat to a lower temperature.
Place the appliance on a flat surface. If the pilot
light still doesn't go out, then empty the appliance's
internal water tank. (See instructions for
Temperature Control).
Make sure that the drainage stopcock is set to the
right position.
Make sure that the connections on hot-air expulsion
duct are in working order.
Make sure that the expulsion duct is not
excessively bent or longer than 140 cm.
Make sure that drainage stopcock is set to the
temperature control position.
Use the suction pad to make the opening on the
window as small as possible.
Lower blinds if available to reduce direct sunlight.
Publicidad
