Publicidad
Idiomas disponibles
Idiomas disponibles
■
Beware of objects thrown by the cutting means. Remove
debris like small stones, gravel, and other foreign objects
from the work area before starting operation. Wires or
string may become entangled with the cutting means.
■
The product is fitted with a harness. Use the harness
while operating the product. Carefully adjust the harness
to fit comfortably and help support the weight of the
product at your right side. Identify the quick-release
mechanism and practice using it before you start using
the product. Its correct use may prevent serious injury in
case of an emergency. Never wear additional clothing
over the harness or otherwise that restrict access to the
quick-release mechanism.
■
Do not wear multiple belt or shoulder harnesses.
■
Always ensure that ventilation openings are kept clear
of debris.
■
Electrical power should be supplied via a residual
current device (RCD) with a tripping current of not more
than 30 mA.
■
Operate the product only in temperatures between 0°C
and 40°C.
■
Store the product in a location where the ambient
temperature is between 0°C and 40°C.
■
If the supply cord is damaged, it must be replaced by a
special cord or assembly available from an authorised
service centre.
■
Before every use, examine the power cord for damage. If the
power cord is damaged, it must be replaced by a qualified
person at an authorised service centre to avoid a hazard.
■
Use heavy-duty gloves while installing or removing
blades, they have sharp edges.
■
Do not attempt to touch or stop the blade when it is rotating.
■
Replace any blade that has been damaged. Always
make sure that the blade is installed correctly and
securely fastened before each use.
■
Use only the manufacturer's replacement TRI-ARC
blade. Do not use any other cutting attachment.
■
Never cut any material over 13 mm diameter.
■
Cover the blade with the blade protector before storing
the product, or during transportation. Always remove the
blade protector before using the product. If not removed,
the blade protector could become a thrown object as the
blade begins to turn.
■
For cutting ease and safety, approach the weeds
being cut from the right to the left. In the event that an
unexpected object or woody stock is encountered, this
practice could minimise the blade thrust reaction. Both
hands must be used at all times to control the product.
■
Injuries may be caused, or aggravated, by prolonged use
of the product. When using the product for prolonged
periods, ensure to take regular breaks.
ADDITIONAL BATTERY SAFETY WARNINGS
■
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse the product,
battery pack, or charger in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-
containing products, etc., can cause a short circuit.
6
Original Instructions
■
Charge the battery pack in a location where the ambient
temperature is between 10°C and 38°C.
■
Store the battery pack in a location where the ambient
temperature is between 0°C and 20°C.
■
Use the battery pack in a location where the ambient
temperature is between 0°C and 40°C.
TRANSPORTATION AND STORAGE
■
Turn off the product, remove the battery pack, and allow
both to cool down before storing or transporting.
■
Remove all foreign materials from the product.
■
Do not store or transport the product with the battery pack
fitted. Remove the battery pack, and secure it separately.
Store the product in a cool, dry, and well-ventilated place
that is inaccessible to children. Keep the product away
from corrosive agents, such as garden chemicals and de-
icing salts. Do not store the product outdoors.
■
For transportation in vehicles, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
TRANSPORTING LITHIUM BATTERIES
■
Transport the battery pack in accordance with local and
national provisions and regulations.
■
Follow all special requirements on packaging and
labelling when transporting batteries by a third party.
Ensure that no batteries can come in contact with other
batteries or conductive materials while in transport by
protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries
that are cracked or leaking. Check with the forwarding
company for further advice.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so can cause
possible injury, can contribute to poor performance, and
may void your warranty.
■
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
■
Turn off the product and remove the battery pack or
disconnect it from the power supply. Make sure that all
moving parts have come to a complete stop before any
cleaning or maintenance task.
■
You may make adjustments or repairs described in this manual.
For other repairs, contact an authorised service centre.
■
For the replacement line, use only a nylon filament line
of the diameter described in the specifications table of
this manual.
■
After each use, clean the product with a soft, dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■
Check all nuts, bolts, and screws before each use and
at frequent intervals for proper tightness to ensure that
the product is in safe working condition. Any part that is
damaged should be properly repaired or replaced by an
authorised service centre.
Publicidad
