Fulgor Milano FOBQ 1000 G X Instrucciones Para La Instalación Y El Uso página 48

EN
12
NOTES
• The appliance MUST only be installed and serviced by
qualified and authorized personnel.
• The product is exclusively intended for outdoor use.
• The product mustbe installed according to the instructions,
which require ventilation openings to allow the grill to work
properly. The lack of adequate ventilation to supply air to
the appliance can lead to poor operation of the burners or
excessive heat build-upin the installation compartment.
• The unitʼs ventilation openings mustnot be covered during
installation.
Gas connection
Connect the appliance to the cylinder or systemaccording to
the requirementsof current law, making sure thatthe appliance
isconfiguredforthetypeofgas available. Ifnot,see: "Adapting
to differenttypes of gas". Also check thatthefeed pressure falls
within thevalues shown in thetable: "Gas specifications".
Rigid and semi-rigid metal and rubber hose
connection
Make the hook-upwith metal fittings and pipes (even flexible
hoses) so as not to stressthe componentsinside the appliance.
A rubber hose connection complies with current law only if
the hose can be inspected along its entire length and easily
replaced near the expiration indicated on the hose.
NOTE: -Afterinstallation, usesoapy water to check theperfect
seal of theentireconnectionsystem.DO NOT USE AN OPEN
FLAME TO CHECK THE GAS SEAL.
X