TEKNIHALL ZDQ-603A Manual Original página 78

NOTE!
If water or other liquids enter the housing, they can cause a short
circuit.
- Do not immerse the product, power cable or mains plug in
water or other liquids.
- Make sure that no water or other liquid gets inside the housing.
NOTE!
Improper assembly can damage the product.
- Do not use any aggressive cleaners, sharp or metallic cleaning
utensils such as knives, hard scrapers or similar items. These
could damage the surfaces.
- Never wash the product in the dishwasher. This would destroy
it.
Cleaning the parts
Clean the individual parts of the product as follows:
1. Clean the water basin 3 with mild detergent and a soft sponge. Make sure that
water does not penetrate the inside of the product.
2. Wipe down the outside of the product housing with a slightly damp, soft cloth.
3. Clean the cover 1, egg tray 2 and measuring cup 6 in warm dishwashing detergent.
Removing scale from the water basin
Scale can accumulate on the water basin 3 over time. You can remove this as follows:
1. Prepare a mixture of one full measuring cup 6 of water and one tablespoon vinegar
or citric acid and pour this into the water basin 3.
2. Insert the mains plug 8 into a socket and switch the product on. As soon as the
water cooks, switch the device off and pull the mains plug 8 out of the socket. Let
the product and the vinegar or citric acid solution cool down.
3. Discard the vinegar or citric acid solution and thoroughly wipe down the water
basin 3. Do not use any abrasive cleaning agents.
Risk of short circuit!
Risk of damage!
78