Kenwood KPL90 Instrucciones página 12

Troubleshooting guide
Problem
The whisk or K-beater
knocks against the bottom
of the bowl or not reaching
the ingredients in the
bottom of the bowl.
Slow speed attachment
cannot be fitted.
The Kitchen Machine
stops during operation.
Cause
Tool at the wrong
height and needs
adjusting.
Check your attachment
is compatible for use
with your model.
Twist connection
system required (Model
KAX)
Overload protection
or overheat system
activated.
Maximum capacity
exceeded.
9
Solution
Adjust the height using a suitable
spanner – see "Tool Adjustment"
section.
Attachment must have the KAX twist
connection system
outlet.
If you own attachments featuring the
Bar Connection System
need to use the KAT002ME adaptor
to connect these to the Twist
Connection System on your Kitchen
Machine.
For more information visit
www.kenwoodworld.com/twist.
Unplug and check for obstruction or
overloading.
If the machine will not operate,
remove some of the ingredients to
reduce the load and restart.
If this still does not resolve the
problem, unplug and allow to stand
for 15 minutes. Plug in and reselect
the speed.
If the machine does not restart
following the above procedure
contact "customer care" for further
advice.
to fit the
you will