Activating/Deactivating The Alarm; Time And Date Setting - Bresser MyTime Duo 80-10010 Instrucciones De Uso

alarm time. Repeatedly press the button to change one
more minute at a time.
In order to set the alarm time 2, press the 12/24 button
once. The display for alarm time 2 will fl ash. The time can
be set as per the above instructions.
After setting the alarm time, slide the SET slide-button (8)
to the LOCK position to complete the setting.
Note:
The alarm time setting must be done for both alarm
functions (AL 1 and AL 2) seperately one after another.

ACTIVATING/DEACTIVATING THE ALARM

After fi nishing the alarm time setting slide the AL ON/OFF
slide-button (3) to the position of the desired alarm function.
The following functions are possible:
Position AL OFF: Alarm deactivated
Position AL 1 ON: Alarm time 1 on
12
Position AL 2 ON: Alarm time 2 on
Position AL 1&2 ON: Alarm times 1 and 2 on
SET 12 OR 24 HOURS SYSTEM
Slide the SET button (8) into LOCK mode.
Press to switch between 12hr or 24hr system. When 'AM'
appears, it means 12hr. Press 12/24 YEAR button again,
'AM' will disappear, it means 24hr system.

TIME AND DATE SETTING

Set year mode:
Slide SET button into DATE SET mode, the date setting
mode will blink. Press 12/24 YEAR button to reach the
desired year.
Set hour:
Slide SET button (8) into TIME SET mode, the time mode will
blink. Press HOUR/MONTH button to reach the desired hour.